Metal additive robot thigh electric-drive shell blank on an exhibition table with placard

Caso de pieza · Metal 3D Printing

Carcasa de muslo robot con accionamiento eléctrico AM

Name: Carcasa de muslo robot con accionamiento eléctrico AM
Brand: 3DWK

Exhibition robot thigh shell with local reinforcement and drive cutouts — for discussing skin-plus-lattice envelopes and which bores need secondary finish.

Subir una pieza similar Especificaciones típicas

Photo courtesy xa-blt.com (authorized for 3DWK use). 3DWK part case — brand remains 3DWK; not a BLT storefront listing.

ProcessMetal 3D Printing

MaterialAluminum alloy

FormPart / context blank

IndustryRobotics

Item	Typical value
Post	Support removal; finish TBD per drawing

Skin-plus-lattice mindset

Thigh shells with local reinforcement change which faces stay as-built versus bored after cut-off.

State drive cutout datums and preferred alloy family
Keep bolt circles thick enough for inserts if needed

RFQ checklist

Envelope, critical bore positions, and any coating keep-outs — bring them on the RFQ.

Siguiente paso

¿Tiene una pieza similar?

Cargue su CAD y sus planos. Un ingeniero revisa los materiales, las tolerancias y el acabado antes de cotizar.

Cargue piezas para un presupuesto Más piezas