3DWK
Solicitar presupuesto

Caso de pieza · Metal 3D Printing

Tirante de hombro de robot AM

Arched robot shoulder brace blank with generative struts — for discussing printable shoulder load paths and bolt-pad thickness for robotics assemblies.

Arched metal additive robot shoulder brace blank with generative struts
Photo courtesy xa-blt.com (authorized for 3DWK use). 3DWK part case — brand remains 3DWK; not a BLT storefront listing.
  1. 01

    Shoulder-brace notes

    Arch struts only help if pads survive tapping and assembly loads.

    • State pad thickness class on the RFQ
    • Mark which faces are paint keep-outs
  2. 02

    Honesty bar

    No claimed payload ratings or robot brand partnerships on this page.

Especificación típica

Puntos de partida para esta pieza

Process
Metal powder-bed fusion
Form
Arched robot shoulder brace
Material
Aluminum alloy
Interfaces
Bolt pads + arch struts
Post
Mill pads TBD
Arched metal additive robot shoulder brace blank with generative struts
Photo courtesy xa-blt.com (authorized for 3DWK use). 3DWK part case — brand remains 3DWK; not a BLT storefront listing.

Siguiente paso

¿Tiene una pieza similar?

Cargue su CAD y sus planos. Un ingeniero revisa los materiales, las tolerancias y el acabado antes de cotizar.

Cargue piezas para un presupuestoMás piezas