Caso de pieza · Metal 3D Printing
Soportes C generativos AM anidados en placa
Generative C-bracket batch still nested on the build plate — useful for talking through nesting density, powder escape between neighbors, and cut-off strategy after a multi-part run.
Especificación típica
| Item | Typical value |
|---|---|
| Process | Multi-part metal AM plate |
| Material | Ti or aluminum alloy |
| Form | Nested generative C-brackets |
| Nesting | Batch layout on build plate |
| Post | Wire-cut / band-saw off plate; finish TBD |
Why show a full nest
Batch nesting is a different conversation from a single studio bracket: neighbor spacing, recoater clearance, and powder removal between parts dominate the RFQ.
- Minimum gap between brackets for powder escape
- Shared support strategy that does not weld neighbors together
- Which parts are first articles versus production nests
Honesty bar
No claimed cycle times, laser counts, or cost-per-part figures on this page — bring those expectations on your RFQ if you have them.
Siguiente paso
¿Tiene una pieza similar?
Cargue su CAD y sus planos. Un ingeniero revisa los materiales, las tolerancias y el acabado antes de cotizar.