Photo courtesy xa-blt.com (authorized for 3DWK use). 3DWK part case — brand remains 3DWK; not a BLT storefront listing.
ProcessMetal 3D Printing
MaterialAluminum or titanium alloy
FormPart / context blank
IndustryAutomotive
| Item | Typical value |
|---|---|
| Post | Support removal; finish TBD per drawing |
Design intent
A rear-subframe exhibit blank is useful for talking through mount lands, envelope, and which faces must be milled after metal AM — not for quoting a finished chassis SKU.
- Call which bushing or bolt faces are critical
- Keep wall stock for taps or inserts where needed
- Separate cosmetic skins from structural ribs
Manufacturing notes
Orient so internal cavities stay flushable after support removal. Mark any sealing or datum faces that must be secondary-finished.
What to put on the RFQ
- Preferred alloy family
- Envelope and critical mount flatness
- Any coating keep-out zones (state them; we do not invent certifications)
Siguiente paso
¿Tiene una pieza similar?
Cargue su CAD y sus planos. Un ingeniero revisa los materiales, las tolerancias y el acabado antes de cotizar.